News

WPC decking pedestal brings high efficiency



Before the plastic wood is laid, the platform must be built first. The main function of the platform is to cover the foundation (ground) of the original unevenness and poor appearance, and provide a complete and flat new ground with the construction of the project, giving the user a better visual appearance. (consistent, neat) and solidly stepping on the feeling (flat, steady). In addition to providing the aforementioned functions, the platform built by the heightening can provide different pedaling height applications (high and low platforms, stairs, etc.) and give the building more visual shape changes. On the other hand, the elevated platform and floor space can increase the air flow under the platform, reduce the problem of humidity and suffocation, and increase the circulation of air to produce better ventilation and heat dissipation.


General platform height

As shown in the above figure, the height of the general platform needs to be measured by the construction team. Then, the height of the platform and the length and width of the covered ground are measured one by one, so that the bottom beam and the supporting material of the platform are cut. Cut and assemble. During the assembly process, the wood is mostly locked with locking screws, which are prone to problems such as drilling offset, wood chipping, wood thread removal, etc. Metals are mostly welded or matched with angle iron and screws, while welding is susceptible to metal cooling. The shrinking physical properties lead to the bending and deformation of the welded structure. In addition, the most important thing is that the cutting material is easy to encounter the unevenness of the ground, which causes the size of the cutting material to be different from the actual size (most of the ground is not completely horizontal, and there are many uneven conditions), which leads to the material need to be again Cropping (too long) or substitute (too short). This process not only wastes material but also increases construction time.


Pedestal

In view of the problems that may arise from the general height of the platform, the new type of fast-arriver group originally created by the plastic-wood company is more suitable for faster, more efficient and convenient assembly and more flexible in response to the situation of the site. Use and adjustment.


The height set includes three components: a T-shaped angle iron, an aluminum extruded support frame, and a disk base. The three main components are mainly made of metal, which increases the robustness of the platform base and reduces the amount of base material used (and also eliminates the problem of wood decay).

2. In use, due to the new type of fast riser, it is designed to have modular components. Therefore, it has greater flexibility in material loss and replacement (no need for a large number of disassembly and assembly), and it is also convenient and easy to transport.

3. In the actual application process, it is only necessary to prepare an appropriate number of components after the measurement of the floor size (to more accurately confirm the purchase quantity of the material).

4. For the assembly of the site, the aluminum extruded member (support frame) is cut to the required height according to the site requirements. The overall structure is based on the large beam, and the angle span of the panel is adjusted with the panel material used above to quickly complete the foundation erection. assembly. The components are combined with each other to reduce the use of screws; on the contrary, the use of screws can increase the strength of the components, reduce the construction time and manpower, and reduce the assembly problems that are easily caused by the properties of the materials themselves (such as the aforementioned wood materials). Collapse and metal welding and other phenomena).

5. In the case of ground level difference, the assembly of T-shaped angle iron, disc base and aluminum extruded support frame is reserved for 2~4CM assembly length, which can be adjusted by screw locking. There is a range of extensions, so the problem of cutting (too long) and substitute (too short) of the material can be reduced.


Pedestal

In view of the problems that may arise from the general height of the platform, the new type of fast-arriver group originally created by the plastic-wood company is more suitable for faster, more efficient and convenient assembly and more flexible in response to the situation of the site. Use and adjustment.

CATEGORIES

CONTACT US

Contact: Mr.Qu

Phone: 13256872068

Tel: 0086-13256872068

Email: changhongwpc@aliyun.com

Add: 1-2-1302,Hongxin Garden, Maidao Road,Qingdao, China